Dracula’s Roof Top

X200 Densi-Proof applied to Waterproof, Harden & Densify

Dracula’s famous Theatre Restaurant on the Gold Coast has had over 3 million guests. Extending over the existing area, the roof of the castle that houses Dracula’s was raised 5m to accommodate giant bone chandeliers. X200 Densi-Proof’s unique chemistry permanently blocks the capillaries of the concrete to ensure there is no water ingress through the concrete roof. The other big benefit was to give a surface that was stronger and that does not dust, meaning that subsequent applied topical membranes have a better stronger mechanical bond and of course, with no water movement through the slab carrying possible contamination or high alkali, no chance of a chemical break down.

 

Read More
Sunshine plaza
Sunshine_plaza_1
Sunshine_plaza_2
Sunshine Plaza QLD

Sunshine Plaza QLD

X230 Densi-Proof  Repeller 

Applied at time of pour to all areas to Cure, Harden, Densify, Waterproof & Repel Contamination.
A single pack one application spray on system that deeply penetrates the concrete, provides permanent waterproofing, curing and surface protection. Line marking can be applied 24 hours after application.

Read More
J_Mcwhellan_3
J_Mcwhellan_1

Mudgee Residential NSW

X550 Carpark Warehouse

Applied time of pour to Cure, Harden, Densify & Repel contamination from the surface of the concrete.

Stunning car port protected with an invisible finish.

Read More

Supermarkets

X200 Densi-Proof
These are just some of the projects where Oxtek Australia products are used by Supermarkets for permanent protection against hydrostatic pressure and moisture vapour. Once X200 Densi-Proof is applied water and other contaminates will not penetrate into the capillaries or voids of the sub floor. This water can “blow off” vinyl and other impervious floors or chemically change the glues creating adhesion issues.

X200 Densi-Proof is an effective moisture barrier on existing and new concrete. Application is quick, clean, safe and environmentally neutral. There is minimum disruption to other trades. On new concrete X200 Densi-Proof is industry best Cure and Seal, allowing floor coverings to be laid 14 days from time of pour. Existing concrete can be laid 24 hours after application of X200 Densi-Proof.

Franklins Eltham 890m2
Safeway Forest Hills 2300m2
Bi-Lo Greenvale 2200m2
Safeway Camberwell 1200m2
A.U.R. Narre Warren 2300m2
Dan Murphy Vermont South 200m2
Kmart Belmont 500m2
Safeway St Albans 2000m2
Bi-Lo Burntbridge 1800m2
Safeway Torquay 2500m2
Spotlight Bayswater 2500m2
Safeway Langwarrin 3200m2
Bakers Delight Various(7) 760m2
David Jones Southland 1000m2
and many many more including Hotels, Clothing and Retail Food.

 

Read More
Altona_Warehouse_1
Altona_Warehouse_2

Warehouse Altona North, Melbourne

X550 Carpark Warehouse

A proprietary silicate siliconate water based formulation applied to an existing warehouse concrete floor to reduce dust, a surface hardener and stain resistance from oils.

Read More

Gold Coast Titans Football Club & Gold Coast United

X200 Densi-Proof 

Applied to 2800m2 at time of pour to Cure, Harden, Densify & Waterproof 

Paul Cain Manager of Masseal Waterproofing Services Pty Ltd – Testimonial

Since he has used X200 Densi-Proof, he has never had a failure or problem at all with moisture related issues and uses it on every installation as a moisture barrier in itself or as an additional safeguard under all coatings and membranes, just in case of damage that may occur to the topical coating. He has used it on roof decks, walls, lift shafts and slabs that are below ground, which are subject to hydro-static pressure with total success. The ability to use it at the time of pour as permanent water proofing and as an excellent curing medium, thus eliminating surface cracking, densifying and hardening without any preparation cost is also a bonus. This saves so much time and money and allows site access within one hour. His customers are delighted with the performance and results and is now being specified more and more by many builders.

Area – Basement car park slab (below water table) & Structural slab below swimming pool.

Used in conjunction with “Liquid Rubber” membrane & “Chemind” waterproofing products.

Read More

Royal Melbourne Showgrounds – Agricultural Hall

You can now maintain the strength and integrity of your concrete floor without acid attack, free of deep seated odour causing substances and with ease of cleaning. Our one part permanent system guarantees an exceptional floor impervious to Urine, Moulds, Abrasion, Water, Chemical, Acids, Oils, Food and Liquids..

Centenary Hall, Royal Melbourne Showgrounds. Recently renovated and part of the multi million dollar upgrade of the Showgrounds, Centenary Hall’s floor has been replaced from timber to concrete.

X260 MEDI-VET™ with X300 Repeller™ was the right choice.

The Royal Agricultural Society wanted a low maintenance, long lasting, odour free, hygienic,anti staining floor. Like most of the halls at the Showgrounds Centenary has multi uses – Animal show and holding, exhibition and trade area and even receptions.

The concrete must be clean and free of odour and look acceptable without staining.

What the society has now got with X260 MEDI-VET™ with X300 Repeller™ is a floor that will not dust, has been increased in strength (giving better abrasion resistance), is free from internal and external attack from chemicals and acids, is waterproof internally and externally, restricts vapours transmission, provides an environment that will not harbour and support moulds or other odour causing substances.

This floor is environmentally neutral, like the product This product is natural and does not harm the applicator or the people and animals that use the space.

X260 MEDI-VET™ is a revolutionary sealer system that penetrates– up to 200mm into concrete, sealing it from within. It not only stops urine and chemical contamination in new concrete but purges out years of existing contaminants from old concrete. Once X260 MEDI-VET™ is applied your concrete floor will have added strength, a harder but not brittle surface, no dusting, no spalling and will be virtually impervious to internal attack from contamination. This is a once only permanent application and is environmentally neutral. X300 Repeller™ is a penetrating, invisible, permanent surface coating. X300 Repeller™ provides a surface that repels water, acids and oils, giving you a more stain resistant floor with little or no effort between cleans. X300 Repeller™ enhances dry surface traction and is odourless, safe and nonflammable. X300 Repeller™ achieved a R13 on wet ramp testing. A complete Independent Slip Resistance Report by the CSIRO is available on request. X260 MEDI-VET™ with X300 Repeller™ will decontaminate existing concrete floors. X260 MEDI-VET™ penetrates deeply (up to 200mm) and purges contaminants to the surface and never lets them re-enter. Old  concrete needs a two part application..

 

Read More

Porsche Showroom VIC

X200 Densi-Proof™

Applied at time of pour. Used as a Curing compound, Waterproofer, Densifier and Hardener. Concrete is permanently waterproofed.

 

Read More

Various Mechanical and Engineering Workshops

You can now combine the strength and character of your concrete floor with ease of cleaning and attractive eye appealing glossy finish. Our two part system guarantees an exceptional floor resilient to Abrasion, Water, Chemical, Acids, Oils, Food and Liquids.

X200 Densi-Proof™ is a revolutionary sealer that penetrates up to 200mm into concrete, sealing it from within. It not only stops oil and chemical contamination for new concrete but purges out years of existing contaminants from old concrete. Once X200 Densi-Proof™ is applied your concrete floor has added strength, a harder but not brittle surface, no dusting, no spalling and is virtually impervious to internal attack from contamination. This is a once only permanent application and is environmentally neutral.

X400 Lustre Shield™ is a penetrating, highly attractive yet extremely durable surface coating. X400 Lustre Shield™ provides a surface that repels water, acids and oils, giving you a more stain resistant floor with little or no effort between cleans.

Cavpower of Adelaide, South Australia. Caterpillar service centre used X200 Densi-Proof with Surface Sheen as a cure and seal at time of pour. This shows the work shop just before hand over. Even after all the construction trades had worked on the surface the floor is in pristine condition. Cavpower can expect a professional looking floor surface, free of oil stains, with an easy sweep and minimum cleaning regime.

Wangaratta Ambulance Service had an epoxy coating with a grit surface that was oil stained and difficult to sweep.
X200 Densi-Proof™ and X400 Lustre Shield™ were applied as a trial of to one of their five bays. The existing coating was removed with a diamond Grinder, X200 Densi-Proof™ was applied and within minutes oil was visibly being purged from within the concrete. This contamination was removed and another light application of X200 Densi-Proof™ was applied and left for 24 hours (without impeding the mechanics from continuing work). The following day the balance of the contaminants was sanded and washed from the surface. X400 Lustre Shield™ was then applied to the clean surface and let for 24 hours to cure.
The picture above shows the floor at 3 weeks. After many spills the Luster Shield™ shows no staining. The epoxy floor is in the foreground. The mechanics are happy they can easily maintain their area to a safe clean and professional standard. The Ambulance service has commissioned the balance of this floor to be done and two other sites.
Gough’s Caterpillar in Christchurch used X200 Densi-Proof and X400 Lustre Shield on this new workshop floor to maintain an easy clean and eye appealing floor surface. The service pit as well as the drain pits were treated to protect against acid and oil attack.

The System

On new concrete at time of pour X200 Densi-Proof plus X400 Lustre Shield are applied as a one part system, you get all the benefits as above plus industry best cure and seal. This application virtually eliminates shrink cracking potential.

On existing and or contaminated concrete a two part system is required. X200 Densi-Proof™ will purge past contaminants to the surface after application and these must be cleaned prior to the second part X400 Lustre Shield™ application.

X400 Lustre Shield™ enhances dry surface traction and is odourless, safe and nonflammable.
An independent (ATTAR) 23 page Slip Resistance Report, wet and dry, is available on request in hard copy or via our web site in Pdf format (X400 Lustre Shield Slip TestIng.pdf).

 

Read More