X550 Carpark Warehouse
A proprietary silicate siliconate water based formulation applied to an existing warehouse concrete floor to reduce dust, a surface hardener and stain resistance from oils.
Warehouse Altona North, Melbourne
Gold Coast Titans Football Club & Gold Coast United
X200 Densi-Proof
Applied to 2800m2 at time of pour to Cure, Harden, Densify & Waterproof
Paul Cain Manager of Masseal Waterproofing Services Pty Ltd – Testimonial
Since he has used X200 Densi-Proof, he has never had a failure or problem at all with moisture related issues and uses it on every installation as a moisture barrier in itself or as an additional safeguard under all coatings and membranes, just in case of damage that may occur to the topical coating. He has used it on roof decks, walls, lift shafts and slabs that are below ground, which are subject to hydro-static pressure with total success. The ability to use it at the time of pour as permanent water proofing and as an excellent curing medium, thus eliminating surface cracking, densifying and hardening without any preparation cost is also a bonus. This saves so much time and money and allows site access within one hour. His customers are delighted with the performance and results and is now being specified more and more by many builders.
Area – Basement car park slab (below water table) & Structural slab below swimming pool.
Used in conjunction with “Liquid Rubber” membrane & “Chemind” waterproofing products.
Royal Melbourne Showgrounds – Agricultural Hall
You can now maintain the strength and integrity of your concrete floor without acid attack, free of deep seated odour causing substances and with ease of cleaning. Our one part permanent system guarantees an exceptional floor impervious to Urine, Moulds, Abrasion, Water, Chemical, Acids, Oils, Food and Liquids..
Centenary Hall, Royal Melbourne Showgrounds. Recently renovated and part of the multi million dollar upgrade of the Showgrounds, Centenary Hall’s floor has been replaced from timber to concrete.
X260 MEDI-VET™ with X300 Repeller™ was the right choice.
The Royal Agricultural Society wanted a low maintenance, long lasting, odour free, hygienic,anti staining floor. Like most of the halls at the Showgrounds Centenary has multi uses – Animal show and holding, exhibition and trade area and even receptions.
The concrete must be clean and free of odour and look acceptable without staining.
What the society has now got with X260 MEDI-VET™ with X300 Repeller™ is a floor that will not dust, has been increased in strength (giving better abrasion resistance), is free from internal and external attack from chemicals and acids, is waterproof internally and externally, restricts vapours transmission, provides an environment that will not harbour and support moulds or other odour causing substances.
This floor is environmentally neutral, like the product This product is natural and does not harm the applicator or the people and animals that use the space.
X260 MEDI-VET™ is a revolutionary sealer system that penetrates– up to 200mm into concrete, sealing it from within. It not only stops urine and chemical contamination in new concrete but purges out years of existing contaminants from old concrete. Once X260 MEDI-VET™ is applied your concrete floor will have added strength, a harder but not brittle surface, no dusting, no spalling and will be virtually impervious to internal attack from contamination. This is a once only permanent application and is environmentally neutral. X300 Repeller™ is a penetrating, invisible, permanent surface coating. X300 Repeller™ provides a surface that repels water, acids and oils, giving you a more stain resistant floor with little or no effort between cleans. X300 Repeller™ enhances dry surface traction and is odourless, safe and nonflammable. X300 Repeller™ achieved a R13 on wet ramp testing. A complete Independent Slip Resistance Report by the CSIRO is available on request. X260 MEDI-VET™ with X300 Repeller™ will decontaminate existing concrete floors. X260 MEDI-VET™ penetrates deeply (up to 200mm) and purges contaminants to the surface and never lets them re-enter. Old concrete needs a two part application..
Porsche Showroom VIC
X200 Densi-Proof™
Applied at time of pour. Used as a Curing compound, Waterproofer, Densifier and Hardener. Concrete is permanently waterproofed.
Various Mechanical and Engineering Workshops
You can now combine the strength and character of your concrete floor with ease of cleaning and attractive eye appealing glossy finish. Our two part system guarantees an exceptional floor resilient to Abrasion, Water, Chemical, Acids, Oils, Food and Liquids.
X200 Densi-Proof™ is a revolutionary sealer that penetrates up to 200mm into concrete, sealing it from within. It not only stops oil and chemical contamination for new concrete but purges out years of existing contaminants from old concrete. Once X200 Densi-Proof™ is applied your concrete floor has added strength, a harder but not brittle surface, no dusting, no spalling and is virtually impervious to internal attack from contamination. This is a once only permanent application and is environmentally neutral.
X400 Lustre Shield™ is a penetrating, highly attractive yet extremely durable surface coating. X400 Lustre Shield™ provides a surface that repels water, acids and oils, giving you a more stain resistant floor with little or no effort between cleans.
Cavpower of Adelaide, South Australia. Caterpillar service centre used X200 Densi-Proof with Surface Sheen as a cure and seal at time of pour. This shows the work shop just before hand over. Even after all the construction trades had worked on the surface the floor is in pristine condition. Cavpower can expect a professional looking floor surface, free of oil stains, with an easy sweep and minimum cleaning regime.
Wangaratta Ambulance Service had an epoxy coating with a grit surface that was oil stained and difficult to sweep.
X200 Densi-Proof™ and X400 Lustre Shield™ were applied as a trial of to one of their five bays. The existing coating was removed with a diamond Grinder, X200 Densi-Proof™ was applied and within minutes oil was visibly being purged from within the concrete. This contamination was removed and another light application of X200 Densi-Proof™ was applied and left for 24 hours (without impeding the mechanics from continuing work). The following day the balance of the contaminants was sanded and washed from the surface. X400 Lustre Shield™ was then applied to the clean surface and let for 24 hours to cure.
The picture above shows the floor at 3 weeks. After many spills the Luster Shield™ shows no staining. The epoxy floor is in the foreground. The mechanics are happy they can easily maintain their area to a safe clean and professional standard. The Ambulance service has commissioned the balance of this floor to be done and two other sites.
Gough’s Caterpillar in Christchurch used X200 Densi-Proof and X400 Lustre Shield on this new workshop floor to maintain an easy clean and eye appealing floor surface. The service pit as well as the drain pits were treated to protect against acid and oil attack.
The System
On new concrete at time of pour X200 Densi-Proof plus X400 Lustre Shield are applied as a one part system, you get all the benefits as above plus industry best cure and seal. This application virtually eliminates shrink cracking potential.
On existing and or contaminated concrete a two part system is required. X200 Densi-Proof™ will purge past contaminants to the surface after application and these must be cleaned prior to the second part X400 Lustre Shield™ application.
X400 Lustre Shield™ enhances dry surface traction and is odourless, safe and nonflammable.
An independent (ATTAR) 23 page Slip Resistance Report, wet and dry, is available on request in hard copy or via our web site in Pdf format (X400 Lustre Shield Slip TestIng.pdf).
Macquarie Centre Carpark NSW
X200 Densi-Proof™
Retro fitted by Danlaid. Used as a waterproofer, densifier and hardener. Concrete is permanently waterproofed.
Kennedy Trailers – Industrial Floor
X200 Densi-Proof and X400 Lustre Shield at Kennedy Trailers Million Dollar Manufacturing Plant
Bairnsdale business uses X200 Densi-Proof and X400 Lustre Shield in their new million dollar manufacturing plant. Kennedy Trailers is a national leader in custom-built trailers for the timber and mining industries.
Bill Bird, Wood Street Floor Coverings and Kennedy Trailers owner Gary Kennedy on site during the installation of the X200 Densi-Proof to the 2600m2 factory area.
Kennedy Trailers is a national leader in custom-built trailers for the timber and mining industries. After careful consideration this award winning East Gippsland company chose Oxtek Solutions products for their new million dollar office and expanded manufacturing area. Local Builder Chris Banks principal of C.M. & H.M. Banks Pty Ltd looked to Oxtek Australia for the polished floor in the front office area. Owner Gary Kennedy approached Bill Bird, owner of Wood Street Floor Coverings, to apply and install X200 Densi-Proof and X400 Lustre Shield as a dust proofer, surface hardener and stain protector for the 2600m2 workshop out back. AFS (Australian Flooring Supplies) supplied the Oxtek Solutions products and arranged for John Daymond to be present to ensure Wood Street Floor Coverings had an easy and trouble free installation.
Industrial Floors
Industrial Floor- Oxtek Solutions Pty Ltd – Spotlight Floor System Success.
Three major manufacturers and a best practice contractor win Spotlight Specification. October 2006.
Finer Floors Finishes originally based in Shepparton, Victoria have been the catalyst in firming the Spotlight specification. Ken Gash from Finer Floors explains “We have been one of Spotlights contractors for years and have now been made consultants for every floor Spotlight does. This includes site visits prior to start, briefing the builders and contractors on the standard they must achieve and the products and their best practice installation. Unfortunately three stores have recently been rejected and redone because of product substitution or deletion, or incorrect installation. This specification has been tried, tested and is successful because,” as Finer Floor Finishes Director Danny Somers says,” if you use best installation practice, the best available moisture barrier by Oxtek – Underlayments by Ardex and the top of the tree polyurethane by Tuff Coat, you can’t go wrong.” A lot of the floors are fast tracked to where the Tuff Coat is installed as little as 14 days or less after the concrete floor is poured. Tuff Coat’s Managing Director Steven Vak said, ”Tuff Coat has extensively tested their products over X200 Densi-Proof with total success and highly recommend X200 Densi-Proof systems. Where floor levelling is required, Ardex products are used with confidence. As a manufacturer I have peace of mind that my coating is sitting on top of two industry best products.” Spotlight plan to open 32 new stores in the coming 18 months.
IKEA Adelaide
X200 Densi-Proof™ as Industry Best Cure and Contamination Protection
On April 20th 2006, Adelaide became the 166th city in the world to boast a brand new IKEA home furnishing store.IKEA Adelaide Store Manager, Mr. Edwin Van Der Graaf, said that new visitors to the Adelaide store will notice the Swedish influence immediately.
Oxtek Solutions Pty Ltd Technical Manager John Daymond worked with IKEA’s Construction company Hansen Yunken to ensure the 23,500 square metre complex had the world’s latest and best concrete floor technology. Oxtek X200 Densi-Proof™ was used at time of pour as industry best cure and seal and surface hardener. Lustre Shield™ was applied as a surface seal against acid and chemical attack, providing slip resistance and glossy good looks. The X200 Densi-Proof™ and Lustre Shield™ System has ensured IKEA an easy-clean, long lasting, attractive floor that breathes and is easily repaired.
X400 Lustre Shield™ is a nomination for this years Most Innovative Product of the Year by the Flooring and PIC Floor Magazine.
Clayton Car Park
Paul Mickus Site Manager for Lanskey Constructions has insisted on X200 Densi-Proof™ as a cure for all his prestige projects. “The only recent project that the client refused to use X200 Densi-Proof™ resulted in concrete that cracked and dusted, it was a petrol station fore court so there is now an easy path for spilled fuel and other contaminants to start early degradation.” Paul told us. “Customers like Porsche Brighton expect the best products and practice available and that’s why I insisted on the recent renovations to the showroom and work room areas having X200 Densi-Proof™ at the time of pour. It gave the client protection from oil ingress, plastic cracking plus providing a hard dust free surface.” These are just two projects of many used by Lanskey Constructions for permanent protection against contamination ingress into the concrete sub floor. Once X200 Densi-Proof™ is applied body fluids, acids, chemicals or any other contaminates will not penetrate into the capillaries or voids of the concrete matrix. This halts early corrosion or break down of the concrete and ensures a microbe free concrete interior that will not harbour disease or allow foul odours. The carparks structured surface has a stronger surface resistance to abrasion from wear after the X200 Densi-Proof application ensuring a longer life as a low slip X200 Densi Proof™ Lanskey Constructions stay ahead of the opposition with industry best cure regime Terry Lucas and Paul Mickus, Site Manager for Lanskey Constructions at North Road McDonalds car park only hours after placement by the concreters, watching the commencement of the X200 Densi-Proof ™ application. X200 Densi-Proof™ will improve and preserve any concrete. Application is quick, clean, safe and environmentally neutral. There is minimum disruption to other trades. On new concrete X200 Densi-Proof™ is industry best cure and seal (equal or better than water ponding), and concrete preservation treatment. X200 Densi-Proof™ is a once only permanent application. It inhibits oils, urine (and other body fluids), water, acids and chemicals.